esd 5611n 1 - line , bi - d irectional, trans ient voltage suppressors descriptions the esd 56 11n is a tvs (tran sient voltage suppressor) designed to protect sensitive electronic components which are connected to data and power lines from over - stress caused by es d (e lectro s tatic d ischarge ) , eft (electrical fast transients) and lightning. the ESD5611N may be used to provide esd protection up to 30 k v (contact discharge ) according to iec61000 - 4 - 2 , and withstand peak pulse current up to 2 8 a ( 8/20 s ) according to iec61000 - 4 - 5. the ESD5611N is available in dfn1006 - 2l package. standard products are pb - free and halogen - free. features ? stand - off voltage: 5 v m ax . ? transient protection for each line according to iec61000 - 4 - 2 (esd) : 30 k v ( contact dis charge ) iec61000 - 4 - 5 (surge): 2 8 a (8/20 s) ? c apacitance: c j = 6 0 pf typ. ? low clamping voltage ? low leakage current ? solid - state silico n technology applications ? computers and peripherals ? cellular ha ndsets ? portable electronics ? notebooks ? camera dfn1006 - 2l circuit diagram n = device code * = month code ( a~z) marking (top view) order i nformation device package shipping ESD5611N - 2/tr dfn1006 - 2l 10 000/tape&reel pin 1 pin 2 n * pin 1 pin 2 1 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
absolute m aximum r ating s electrical characteristics (t a = 25 o c, unless otherwise noted) 3 1) non - repetitive current pulse, according to iec61000 - 4 - 5. definitions of electri cal characteristics para meter symbol rating unit peak pulse power ( t p = 8/20 parameter symbol condition min. typ. max. unit reverse s tand - off voltage v rwm 5 v rever se leakage current i r v rwm = 5 v 1 1 ) v cl i pp = 1a, t p = 8/20s = 8/20s esd 5611n 2 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
typical characteristics ( t a = 25 o c, unless otherwise noted ) 8/20 s w aveform per iec61000 - 4 - 5 clamping voltage vs. peak pulse current non - repetitive peak pulse p ower vs. pu lse time contact discharge current waveform per iec61000 - 4 - 2 capacitance vs. reveres voltage power derating vs. ambient t emperature 1 10 100 1000 10 100 1000 peak pulse power (w) pulse time ( esd 5611n 3 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
typical characteristics ( t a = 25 o c, unless otherwise noted ) esd clamping ( +8kv contact discharge per iec61000 - 4 - 2) tlp measurement esd clamping ( - 8kv contact discharge per iec61000 - 4 - 2 ) -8 -6 -4 -2 0 2 4 6 8 -24 -20 -16 -12 -8 -4 0 4 8 12 16 20 24 z 0 = 50 ? t r = 2ns t p = 100ns tlp current (a) tlp voltage (v) esd 5611n 4 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
package outline dimensions dfn 1006 - 2l top view bottom view side view symbol dimensions in millimeter min. typ. max. a 0. 40 - 0.50 a1 0.00 - 0.05 a3 0.125 ref. d 0.95 1.00 1.05 e 0.55 0.60 0.65 b 0.20 0.25 0.30 l 0.45 0.50 0.55 e 0.65 typ. recommend l and p attern (unit: mm) note: this land pattern is for your reference only. actual pad layouts ma y vary depending on application. esd 5611n 5 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
|
